# Difference between revisions of "Page Layout"

This page focuses on Basics of page design and layout. It will allow you to continue on further topics like Presentations layout, Visual debugging, Floating Objects, Columns, Layers, Grid typesetting, PDF Boxes. But first, one needs to understand the basics of page layout by ConTeXt.

# Typesetting areas

The 25 typesetting areas of a ConTeXt page are divided into 5 columns and 5 rows. From left to right, one encounters `leftedge`, `leftmargin`, `text`, `rightmargin`, and `rightedge`. From top to bottom, the areas are called: `top`, `header`, `text`, `footer`, `bottom`. E.g. `leftmargin` is the margin area to the left of the main text area; `{leftmargin,bottom}` is below it, at the same height as the `bottom` area. In between the two lies the area `{leftmargin,footer}`.

The graphic below illustrates the areas and dimensions. The row and column names are written along the edges of the page. The arrows correspond to layout dimensions; the more important a dimension is (i.e. the more of the layout is pushed around when you change it), the thicker its arrow and the larger its name.

# Defining the layout

Positioning the areas is by setting the following dimensions using \setuplayout[backspace=5cm,...]. The dimensions are mentioned in order of how ‘primitive’ they are: e.g. altering the `topspace` pushes around all other vertical dimensions, but altering the `header` affects only the `headerdistance` and the `textheight`.

When you define a page layout, it's always a right page that you're defining; if you use a double page layout, 'right' and 'left' values are mirrored on a left page. Doublesided typesetting is activated with \setuppagenumbering[alternative=doublesided].

1. Set the `backspace` and `width`, and the `topspace` and `height`. The `width` is the width of the main typesetting area; the `backspace` is its distance from the left edge of the page. The `height` is the distance from the top of the header to the bottom of the footer; the `topspace` is the distance from the top edge of the page to the top of the header.
2. Set the `header` and `headerdistance`, and the `footer` and `footerdistance`. The `header` is the vertical size of the header area; the `headerdistance` is the distance from the header area to the text area. The `footer` and `footerdistance` work likewise.
3. Once the header(distance) and footer(distance) are subtracted from the `height`, what remains is the `textheight`: the height of the main typesetting area. Although it would be very useful, you cannot set this dimension directly.
4. If you want to typeset anything above the header, define `topdistance` (the distance from the top of the header to the bottom of the topmost typesetting area) and `top` (the height of the topmost typesetting area). For typesetting below the footer, define `bottomdistance` and `bottom`.
5. As for the horizontal dimensions apart from the `width`: starting at the left edge of the main text area, and moving away from the center, one first sets the `leftmargindistance`; then one sets the width `leftmargin` of the margin typesetting area; then one sets the `leftedgedistance`; and then there is the `leftedge` typesetting area. On the right: `rightmargindistance`, `rightmargin`, `rightedgedistance`, `rightedge`.

# Paper size

See the dedicated page Paper setup, it includes details on:

# Example layout

```\setuppapersize[A4][A4] % this is the default and may be omitted
\setuplayout[backspace=20mm,
width=160mm,
topspace=20mm,
footer=0mm,
height=250mm]
```

## Let's gather examples here

Cover pages
Cover Pages (2013, 2019)
Other
Example photo page layout (2010)

# Imposition

Imposition is a prepress printing process. It consists of the arrangement of the printed product’s pages on the printer’s sheet, in order to obtain faster printing, simplify binding and reduce paper waste (wikipedia).

We built a dedicated page about Imposition, because making booklets, to arrange pages in proper order for printing it's a topic in itself. This is where you will use \setuppaper and \setuparranging.

# Multiple layouts

If you need to use different layouts in some parts of the document, you can set up a global layout, and then define additional named layouts for the deviating parts. You only need to specify the dimensions that differ: unspecified dimensions will be inherited from the global layout.

To switch to a different layout, call it up in the appropriate place in the document. To revert back to the global layout, use \setuplayout[reset].

```\setuplayout[...] % global layout
\definelayout[wide][...] % layout of the first page

\setuplayout[wide]  % switch to layout called 'wide'
\setuplayout[reset] % switch back to the global layout
```

To specify in advance that you want to change layouts starting from page 4 (e.g.), use \definelayout[4][...]. Resetting the layout must be done explicitly; else, the new layout will be used until the end of the document.

```% different layout for first two pages
\definelayout[1][wide]
\definelayout[3][reset]
```

For the page numbers you can use absolute numbers (as above), relative numbers (like +1, -2) or the keywords odd, even, first and last.

```\setuplayout[ % default layout (right page)
...
]
\definelayout[even][ % different layout on left pages
...
]
```

If you define additional layouts in a doublepage (duplex) setup, remember to think mirrored: leftmargin defines the right margin, backspace is the distance from the spine to the right edge of the text area etc.

.

Warning!

At the moment a layoutchange (setuplayout) inside a page is not proper working in mkiv duplex mode. For more details and actual state see mailing list and Bug Layoutchange inside page while duplexmode.

# Table of Parameters

The first column is the name by which the variable is set in \setuplayout. The second column is the name by which TeX stores the variable. This name is usually the same, but sometimes different; knowing it allows you to invoke it with code like `The paper's height is \the\paperheight.` Any remarks (usually a short description) are given in the third column.

\setuplayout[...] dimension Remarks
paperheight \paperheight height of paper page
paperwidth \paperwidth width of paper page
printpaperheight \printpaperheight differs from paperheight when using Imposition (arranging)
printpaperwidth \printpaperwidth differs from paperwidth when using Imposition (arranging)
topspace \topspace above header: from top rim of paper to to top rim of header
backspace \backspace from left rim of paper to left rim of main text area
height \makeupheight sum of heights of text area, header and footer (plus distances)
width \makeupwidth width of the main text area. \makeupwidth is normally same as \textwidth, but it can be different, for example in columns
top \topheight height of the top area
topdistance \topdistance between top and header
textheight \textheight height of text area
footerdistance \footerdistance between text and footer
footer \footerheight height of footer area
bottomdistance \bottomdistance between footer and bottom
bottom \bottomheight space below footer (but isn't calculated automatically)
bottomspace \bottomspace space from bottom footer to bottom rim of paper
cutspace \cutspace from right rim of paper to right rim of main text area
leftedge \leftedgewidth from left rim of paper to left rim of left margin
leftedgedistance \leftedgedistance between leftegde and left margin
leftmargin \leftmarginwidth width of left margin (marginals space)
leftmargindistance \leftmargindistance between left margin and text
textwidth \textwidth width of text area. when columns are used, the value of \textwidth can differ from \makeupwidth
rightmargindistance \rightmargindistance between text area and right margin
rightmargin \rightmarginwidth width of right margin (marginals area)
rightedgedistance \rightedgedistance between right margin and right edge
rightedge \rightedgewidth from right margin to right rim of paper
horoffset ? bleed from left of paper
voroffset ? bleed from top of paper

Note:

• width=middle
```     if cutspace == 0pt then
cutspace = backspace
end
makeupwidth =  paperwidth- backspace -cutspace
```
• width=fit
```
if cutspace == 0pt then
cutspace = backspace
end
makeupwidth = paperwidth-cutspace
scratchdimen = backspace - leftedgewidth-leftedgedistance-leftmarginwidth-leftmargindistance
if scratchdimen< 0pt then
scratchdimen = 0pt
end
makeupwidth = makeupwidth - rightmargindistance-rightmarginwidth- rightedgedistance-rightedgewidth- scratchdimen
```
• otherwise:
```       makeupwidth=width
if cutspace == 0pt then
cutspace = paperwidth-makeupwidth-backspace
else
% A kind of inconsistent specification, but used
% in for instance s-pre-19.tex; the cutspace is
% used only for determining some kind of right
% margin; don't use this in doublesided mode
pass
end
```

(From page-lay.mkiv.)